View source for BMC UPS

=ups monitoring=
==BMC - parameter naming==
For 10.156.* network<br>
UPS_ParameterName_xxx_yyy (where xxx_yyy is last two parts of IP)<br>
Sample: UPS_BatteryStatus_128_251<br><br>

For 10.15*.* network<br>
UPS_ParameterName_z_xxx_yyy (where z_xxx_yyy is last two parts of IP preceeded by last digit of second part)<br>
Sample: UPS_BatteryStatus_7_128_251<br>
==powerware==
===Battery Status===
====OID====
.1.3.6.1.2.1.33.1.2.1
====Description====
The indication of the capacity remaining in the UPS
system's batteries. A value of batteryNormal
indicates that the remaining run-time is greater than upsConfigLowBattTime. A value of batteryLow indicates that the remaining battery run-time is less than or
equal to upsConfigLowBattTime. A value of
batteryDepleted indicates that the UPS will be unable
to sustain the present load when and if the utility
power is lost (including the possibility that the
utility power is currently absent and the UPS is
unable to sustain the output).


====BMC Configuration File lines (sample)====
   "/AS/EVENTSPRING/PARAM_SETTINGS/POLLTIMES/SW_SNMP_POLLING/UPS_BatteryStatus_128_251/SNMPPollingColl/interval" = { REPLACE = "3600" },
 "/AS/EVENTSPRING/PARAM_SETTINGS/THRESHOLDS/SW_SNMP_POLLING/UPS_BatteryStatus_128_251/Status" = { REPLACE = "1,0 0 0 0 0 0,1 1 1 0 0 1,0 0 0 0 0 0" },
 "/AS/EVENTSPRING/PARAM_SETTINGS/THRESHOLDS/SW_SNMP_POLLING/UPS_BatteryStatus_128_251/Value" = { REPLACE = "1,0 0 0 0 0 0,1 0 1 0 0 1,1 3 4 0 0 2" },
 "/MASAI/SENTRY8/UPS_BatteryStatus_128_251/label" = { REPLACE = "BatteryStatus" },
 "/MASAI/SENTRY8/UPS_BatteryStatus_128_251/oid" = { REPLACE = ".1.3.6.1.2.1.33.1.2.1.0" },
 "/MASAI/SENTRY8/UPS_BatteryStatus_128_251/oidType" = { REPLACE = "integer" },
 "/MASAI/SENTRY8/UPS_BatteryStatus_128_251/parent" = { REPLACE = "UPSmonitoring" },
 "/MASAI/SENTRY8/UPS_BatteryStatus_128_251/port" = { REPLACE = "161" },
 "/MASAI/SENTRY8/UPS_BatteryStatus_128_251/specificAlertActions" = { REPLACE = "" },
 "/MASAI/SENTRY8/UPS_BatteryStatus_128_251/status" = { REPLACE = "1" },
 "/MASAI/SENTRY8/UPS_BatteryStatus_128_251/type" = { REPLACE = "SNMPPolling" },

====Functionality====
*Trigger a warning if states are between 0 and 1
*Trigger an alarm if states are between 3 and 4
*Poll every 60 minutes
===Ouput Load===
====OID====
.1.3.6.1.2.1.33.1.4.4.1.5<br><br>
For 3 phase systems its respectively
.1.3.6.1.2.1.33.1.4.4.1.5.1<br>
.1.3.6.1.2.1.33.1.4.4.1.5.2<br>
.1.3.6.1.2.1.33.1.4.4.1.5.3
====Description====
The percentage of the UPS power capacity presently
being used on this output line, i.e., the greater of
the percent load of true power capacity and the
percent load of VA.
====BMC Configuration File lines (sample)====
 "/AS/EVENTSPRING/PARAM_SETTINGS/POLLTIMES/SW_SNMP_POLLING/UPS_OutputLoad_128_251/SNMPPollingColl/interval" = { REPLACE = "3600" },
 "/AS/EVENTSPRING/PARAM_SETTINGS/THRESHOLDS/SW_SNMP_POLLING/UPS_OutputLoad_128_251/Status" = { REPLACE = "1,0 0 0 0 0 0,1 1 1 0 0 1,0 0 0 0 0 0" },
 "/AS/EVENTSPRING/PARAM_SETTINGS/THRESHOLDS/SW_SNMP_POLLING/UPS_OutputLoad_128_251/Value" = { REPLACE = "1,0 0 0 0 0 0,1 80 200 0 0 2,0 0 0 0 0 0" },
 "/MASAI/SENTRY8/UPS_OutputLoad_128_251/community" = { REPLACE = "public" },
 "/MASAI/SENTRY8/UPS_OutputLoad_128_251/host" = { REPLACE = "10.156.128.251" },
 "/MASAI/SENTRY8/UPS_OutputLoad_128_251/label" = { REPLACE = "OutputLoad1" },
 "/MASAI/SENTRY8/UPS_OutputLoad_128_251/oid" = { REPLACE = ".1.3.6.1.2.1.33.1.4.4.1.5.1" },
 "/MASAI/SENTRY8/UPS_OutputLoad_128_251/oidType" = { REPLACE = "integer" },
 "/MASAI/SENTRY8/UPS_OutputLoad_128_251/parent" = { REPLACE = "UPSmonitoring" },
 "/MASAI/SENTRY8/UPS_OutputLoad_128_251/port" = { REPLACE = "161" },
 "/MASAI/SENTRY8/UPS_OutputLoad_128_251/specificAlertActions" = { REPLACE = "" },
 "/MASAI/SENTRY8/UPS_OutputLoad_128_251/status" = { REPLACE = "1" },
 "/MASAI/SENTRY8/UPS_OutputLoad_128_251/type" = { REPLACE = "SNMPPolling" },
====Functionality====
Trigger alarm when load is over 80%
====Note====
With three phase systems you have three parameters (entries), f.e. OutputLoad1, OutputLoad2, OutputLoad3)